Decal Set Hotwheels Honda NSX Mobil1
Transparant Decal
Precoated
*diecast are not include
How to apply decal:
1. Spray the decal with clear coat before use. Wait until dry (30 min - 1 hour)
2. Cut the decal using small scissor as the template
3. Dip on water for 10 second (Recommend to use pin set)
4. Spray diecast surface with water
5. Apply decal on diecast surface by sliding it to diecast body. For white toner decal don't forget to flip the image
6. Set the decal on the right position and use tissue to remove the water, keep the decal on the right position.
7. Make sure decal are applied correctly
8. After dry you can spray all body with clear coat to give more protection
Good luck ✌
If you have any doubt you can googling on youtube with keyword "water slide decal".